 |
|
 |
Find hyster s 1.4 1400kg stacker in and around wales Forklifts Wales Listing - Barloworld Handling Ltd (Cardiff) |
Top Tip - If you are considering purchasing a new or used forklift it is a good idea to look at 3 or 4 similar forklifts and compare the price of each forklift before you make your final decision.

This page gives you contact information for Barloworld Handling Ltd (Cardiff) based in Cardiff and also provides you with information and impartial advice about hyster s 1.4 1400kg stacker in and around wales that we hope you will find useful.
Barloworld Handling Ltd (Cardiff)
Ocean Way
Cardiff
Vale of Glamorgan
CF24 5BH
Tel: 029 20454900
Barloworld Handling Ltd (Cardiff) is a forklift dealer operating in and around areas of wales, specialising in the supply of new, used and refurbished forklifts for sale, lease or contract hire.
The Forklift Network can help you to find a wide range of forklifts from dealers in and around wales.- click here to search >>
|
|
If you have come to our website to find hyster s 1.4 1400kg stacker in and around wales then we would like to give you some tips.
While searching for hyster s 1.4 1400kg stacker in and around wales you may need to be aware that forklifts can operate in explosive atmospheres as long as they have been appropriately modified and then are carefully maintained by a properly trained engineer.
Tip - If you are considering hyster s 1.4 1400kg stacker near wales it may be useful to you to know that in the UK a standard pallet is around 2tonnes in weight and therefore a standard forklift will carry up to 2.5tonnes.
While trying to find hyster s 1.4 1400kg stacker in and around wales it may interest you to know that a warehouseman received over £50,000 in compensation when his leg was crushed between a warehouse wall and a broken down forklift he was moving. It was found that the employer did not have adequate safety measures in place and no safe system for handling with break-downs.
While looking for hyster s 1.4 1400kg stacker in and around wales be aware that forks lengths vary. Long forks reduce the aisle width that the forklift can turn or right angle stack in so you need to be sure that you match the fork length to the intended use.
|
|
 |